null

0

Your cart is empty

ProXpress M3370DN

Konica Minolta ProXpress M3370DN printer

Duplex, network and fax in one mono box: the ProXpress M3370DN is built for the small workgroup that still lives on paper workflows. It runs the MLT-D203 cartridge series, and this page stocks the high-yield MLT-D203L at 5,000 pages, the extra-high MLT-D203E at 10,000 and the ultra-high MLT-D203U at 15,000, alongside a cartridge listed under the M3370DN's own name. The family's standard size, the 3,000-page MLT-D203S, covers lighter duty.

Three paper functions in one machine means three separate reasons to print: shared network jobs, double-sided documents and a fax line that prints whatever it receives. Workgroups like this rarely think about toner until the machine stops — and on a three-function machine, a stop stalls everything at once. The buying decision is really about how much warning-free running time each cartridge size purchases.

Toner Cartridges for ProXpress M3370DN

CartridgeColorPage Yield
MLT-D203L High YieldBlack5,000 pages
MLT-D203L High Yield — 3 PackBlack5,000 pages
MLT-D203L Premium High Yield — 5 PackBlack5,000 pages
MLT-D203E Extra High YieldBlack10,000 pages
MLT-D203U Ultra High YieldBlack15,000 pages
ProXpress M3370DN High YieldBlackSee product page
ProXpress M3370DN High Yield — 5 PackBlackSee product page

Which cartridge should you buy?

Consider stepping up one size from what a comparable non-duplex machine would use. Duplexing does not change toner use per side, but duplex offices print more sides overall, and the ProXpress M3370DN adds fax reception on top of that baseline. A workgroup that would run an MLT-D203L elsewhere is a good candidate for the MLT-D203E here; the busiest should go straight to the MLT-D203U and its 15,000 pages. Every step up lowers cost per page, and the multi-pack listings of the L size suit teams that prefer smaller, more frequent stock. All stocked sizes share the same fit — the only wrong answer is the size that runs out mid-week.

Chip, toner and everyday use

The chip on each compatible cartridge lets the ProXpress M3370DN recognize it and report levels normally — useful when three functions compete for the same supply. Keep the spare beside the machine rather than in a central store; on a fax-equipped workgroup printer, minutes matter. Yields assume 5% coverage, and fax pages of plain text come close to that, while dense network print jobs pull consumption up. When output fades, a gentle side-to-side rock redistributes toner and often restores density for the remaining pages. Store cartridges sealed and flat, away from heat, and open the replacement only when the old one truly gives out.

Frequently Asked Questions

Should I choose a different MLT-D203 size for the ProXpress M3370DN than for the non-duplex M3370?

Consider stepping up one size. Duplexing does not change per-side toner use, but duplex offices tend to print more sides in total — so if a plain M3370 runs comfortably on the L, the DN version is a good candidate for the E or U.

The ProXpress M3370DN defaults to duplex. Does that halve my toner use?

It halves paper use, not toner. Each printed side still takes the same toner; you simply put two sides on each sheet. The saving shows up in the paper tray and the filing cabinet.

Which size suits a fax-heavy workgroup?

The MLT-D203E or MLT-D203U. Fax prints unattended and adds a baseline consumption nobody schedules, so the extra capacity absorbs it without shortening the interval between planned cartridge changes.

Do all four MLT-D203 sizes fit the ProXpress M3370DN?

Yes — the S, L, E and U are one family with one fit, differing only in how much toner they hold. This page stocks the L, E and U sizes plus the model-named cartridge, since workgroup volumes rarely suit the standard fill.

SELECT YOUR PRINTER FAMILY TO SHOP ProXpress M3370DN PRODUCTS