null

0

Your cart is empty

BizHub C3850FS

BizHub C3850FS printer

The FS in BizHub C3850FS marks the finishing-equipped version of the C3850 — stapling and sorting hardware on the same compact color platform — and its toner shelf is unchanged: the TNP-48 family, listed as TNP48, with black TNP48K and the colors TNP48C, TNP48M and TNP48Y each stocked singly. Finished documents still begin as toner on paper, so the four cartridges behind the finisher decide what every stapled set actually costs.

Offices buy the FS configuration because their output leaves the building finished: proposals bound for clients, training packs, report sets that arrive stapled and sorted instead of collated by hand. That kind of work is planned work — documents are composed, proofed and produced in runs — and planned runs are unforgiving of a machine that stops for toner halfway through a set. The finisher changes how documents end, not how they print, which keeps the C3850FS's supply planning identical to its plainer sibling's.

Toner Cartridges for BizHub C3850FS

CartridgeColorPage Yield
TNP48 four-color set (K / C / M / Y)Black, cyan, magenta, yellowOn the product page
TNP48 three-color set (C / M / Y)Cyan, magenta, yellowOn the product page
TNP48K black — pack of 2BlackOn the product page
TNP48K black cartridgeBlackOn the product page
TNP48C cyan cartridgeCyanOn the product page
TNP48M magenta cartridgeMagentaOn the product page
TNP48Y yellow cartridgeYellowOn the product page

Which cartridge should you buy?

Stock for the run, not for the week. Before a long finishing job, glance at all four gauges: a set that staples beautifully for ninety pages and stops at ninety-one wastes both paper and time. A full spare set on the shelf is the cheap insurance, topped up with the black two-pack, since text-heavy documents drain the TNP48K first. For everyday top-ups, buy the single color the machine asks for — the three-color set only earns its place when several colors are low together. Compatible cartridges here carry a 1-year warranty and 1-year returns.

Chip, toner and everyday use

Stapling, sorting and stacking happen after the printed image exists, and none of them consume a grain of toner — only the page image draws on the cartridges. The practical consequence is timing: swap a cartridge that is nearing empty before a long finishing run rather than during it, so a set is never split by a toner stop. Fit each new cartridge fully home so its chip registers, pull its seal clear in one motion, and treat stated yields as estimates at 5% coverage — dense covers on finished documents run well past that assumption.

Frequently Asked Questions

What does the FS add to the BizHub C3850FS, and does it affect toner?

The FS denotes the finishing configuration — stapling and sorting options fitted to the machine. It does not change the TNP-48 cartridges or how fast they are consumed; toner planning is identical to the base C3850.

Can TNP-48 cartridges be shared between the C3850FS and the C3850?

Yes, the cartridges are identical across both models, and the BizHub C3350 uses them too. One TNP-48 stock can serve every machine in this compact family.

Do finishing features like stapling use extra toner on the C3850FS?

No. Finishing is a mechanical step that happens after printing, and it draws nothing from the cartridges. If a finished run looks faded, the cause sits in a cartridge, not in the finisher.

Which cartridge empties first on finished-document work?

Usually the black, since stapled sets are typically text with color covers and charts rather than wall-to-wall color. Track the four levels separately and reorder per color instead of by the set.

More printers that use the same cartridges

The BizHub C3350 and the BizHub C3850 run on the same TNP48 black cartridge.

SELECT YOUR PRINTER FAMILY TO SHOP BizHub C3850FS PRODUCTS