Clever Supplies brand products are made in the USA! Why pay more for cheaper product with a high defective rate? You will end up having to send it back to the manufacturer. Your time is valuable. Get a quality product that you KNOW will work. Purchase the Clever Supplies Compatible for Kyocera-Mita TK562 (TK562K) Black Toner Cartridge and experience the difference! All Clever Supplies brand products are backed by '100% Quality Satisfaction' 1 year warranty against defects in materials and workmanship for all toner products. Free tech support for any problems for all Clever Supplies brand products. The use of Clever Supplies brand replacement laser toner cartridges and supplies does not void printer warranty. Premium Quality Replacement Toner Cartridge is made by ISO9001 Certified Factory to Meet or Exceed OEM Standards. These units are manufactured 100% brand new with all new parts including OPC drums, wiper blades, a smart chip and other internal parts, they are an economical alternative to expensive OEM TK562K Compatible Toner Cartridges. The Compatible Toner Cartridges will produce the same amount of page yield as an OEM cartridge would. This is a Compatible for Kyocera-Mita TK562 Toner Cartridges guaranteed to perform with Kyocera-Mita Laser Printers. It replaces the original Kyocera-Mita TK562 Black. The use of compatible replacement Cartridges and supplies does not void Printer Warranty. Our Compatible for TK562K. Cartridge is a replacement for OEM Kyocera-Mita. We offer a 100% Quality Satisfaction Guarantee on our Compatible for TK562K Laser Toner Cartridges and supplies. For use in the following printers: FS-C5300DN, FS-C5350DN
Frequently Asked Questions
How do I know this is the black my printer wants?
Match the code on the cartridge you are taking out: it should read TK562K. The letter K marks the black in this family — the color cartridges carry C, M and Y codes instead — so if the old unit says TK562K, this is its direct replacement.
My text has gone gray and washed out — is that the cartridge?
Usually, yes. Uniformly faded text with no other fault is the classic signature of a black at the end of its toner. Print a test page first: if the black areas are pale across the whole sheet rather than streaked in one band, the cartridge is spent and a fresh TK562K is the fix.
How many pages will I get from it?
The TK562K is rated at 12,000 pages at standard coverage. That is the full-capacity rating — this is the standard replacement cartridge, not a reduced-fill starter of the kind that ships inside a new printer.
How involved is the changeover?
A couple of minutes and no tools. Open the printer, lift the old black out, rock the new cartridge gently side to side to level the toner, and slot it in until it seats. No technician, no settings to change, nothing to configure afterwards.
The first print after fitting is still faint — what now?
Remove the cartridge, rock it gently again, and reseat it firmly; toner that has settled in transit is the usual cause. If a test page after that is still pale, contact us — but in practice the reseat resolves it.
What if the cartridge disappoints me?
It is covered by a 1-year warranty with 1-year free returns, detailed on our shipping & returns page. If the cartridge fails or simply is not right within the year, it goes back free and is dealt with on its own.
What kind of pages shorten the 12,000-page rating the most?
Anything that lays toner down in areas rather than lines: shaded form boxes, bold display headings, logos, charts and full-page graphics. A cartridge feeding that mix can finish thousands of pages short of its rating, while the same TK562K printing plain correspondence all day can meet the figure or run past it. The rating is a standard-coverage yardstick — your document mix decides where your real number lands.
How will I know this cartridge is nearing its end before print quality suffers?
Note the date, or the printer's page counter, on the day it goes in. Combined with what you know of your monthly volume, that gives you a rough position in the cartridge's life at any moment. Then act on the earliest signal: when text first starts to lighten, order the next TK562K, rather than waiting for the day the printer stops with a job half printed.
The delivery has arrived — what do I check before opening the box?
Read the code on the box before you break the seal: it should say TK562K, matching the cartridge that is coming out of the printer. The K is the black's marker in this family, while the color cartridges carry C, M and Y codes. A wrong delivery caught while the packaging is intact is a straightforward exchange; the same discovery after the seal is broken is an unnecessary argument.
What do I do with the old cartridge once the new one is fitted?
Put the spent unit into the packaging the new TK562K arrived in, so leftover toner stays contained, and keep it until the replacement has printed cleanly for a few days — if anything is questioned, the old cartridge is still on hand. After that, it leaves through a recycling or e-waste route, not the general office trash, and it should never be shaken out or opened up over a bin.
About This TK562K Black Cartridge
The single TK562K black cartridge for the Kyocera FS-C5300DN — the same black the FS-C5350DN takes — priced at $55.38 and rated at 12,000 pages. It is the straightforward answer to the most common print complaint in any office: text that has faded to gray because the black has run its course. Match the code, swap it in minutes, and the printer is back to full-density documents. Part of our compatible Kyocera-Mita range, dispatched from our IL, PA, GA and CA warehouses, support Monday to Friday, 9 AM to 5 PM CST.
See Compatible Printers
Read more about our ink!
