null

0

Your cart is empty

HL-1870n

Print quality on the Brother HL-1870n depends on the DR500 drum unit as much as on the toner that feeds it. The drum is its own replaceable component, changed far less often than a cartridge, and this page lists it in compatible two-packs and four-packs plus the genuine Brother version for when its surface finally wears.

There is a particular frustration reserved for this printer design: a brand-new toner cartridge installed over a tired drum produces the same mediocre pages as the old one, and the new cartridge gets the blame. HL-1870n owners who learn to read the page — patterned marks mean drum, uniform faintness means toner — stop buying the wrong part and keep output consistent for years.

Toner Cartridges for HL-1870n

Below are the three DR500 listings for this printer: two compatible multipacks for owners who keep spares, and the genuine Brother drum unit for those who replace like with factory like.

CartridgeColorPage Yield
DR500 Compatible Drum Unit 2 PackBlackSee product page
DR500 Compatible Drum Unit 4 PackBlackSee product page
DR500 Genuine Brother Drum UnitBlack20,000 pages

Which cartridge should you buy?

Buy for the symptom you have confirmed. If repeating marks or background haze point to the drum, a compatible two-pack replaces the worn unit and leaves a spare for the next cycle, which on a 20,000-page part may be years away. The four-pack serves offices with several family models to maintain. The genuine DR500 is the factory-rated option. With a 1-year warranty and 1-year returns behind the compatible drums, starting there carries little risk.

Chip, toner and everyday use

Fingerprint oil is a drum's quiet enemy: handle the unit by its edges and frame, never the green cylinder, and keep it in its protective bag whenever it is outside the printer. Light also degrades the surface, so work briskly during a change rather than leaving the drum exposed on a bright bench. If output shows a single repeating blemish after a swap, check that nothing is resting against the new drum's surface inside the machine.

Frequently Asked Questions

Why did a new toner cartridge not fix my print quality?

Because on the HL-1870n the image is formed on the DR500 drum, not inside the toner cartridge. If the drum surface is worn or marked, fresh toner simply reproduces the same defects. Swap in a new drum and the cartridge you already own will usually print the way you expected.

How often does the DR500 need replacing?

By pages, not by time: the genuine unit is rated at 20,000 pages, which for many offices means years between changes and several toner cartridges in between. Heavy coverage shortens that span; light, occasional use stretches it well beyond the rating period in calendar terms.

What do the compatible drum packs on this page include?

The two-pack and four-pack listings each contain that quantity of DR500 drum units in compatible form, covered by a 1-year warranty and 1-year returns. The genuine Brother DR500 is the single factory unit listed alongside them. All three fit the HL-1870n and the family models below.

Can I clean the drum instead of replacing it?

Gentle cleaning can clear loose toner dust, but it cannot restore a worn or scored surface, and rubbing the cylinder risks making matters worse. If defects repeat at fixed intervals after basic checks, replacement is the reliable fix — and on a part rated around 20,000 pages, it is a rare one.

More printers that use the same cartridges

The same DR500 drum unit covers the rest of this Brother family, including DCP-8020, DCP-8025D, DCP-8025DN, HL-1650, HL-1650L, HL-1650N, HL-1650N+, HL-1670NLT, HL-1670n, HL-1850, HL-1850LT, HL-1870NLT, HL-5040, HL-5050, HL-5050LT, HL-5070DN, HL-5070NLT, HL-5070n, HL-8420, MFC-8420, MFC-8820, MFC-8820D, MFC-8820DN.

SELECT YOUR PRINTER FAMILY TO SHOP HL-1870n PRODUCTS