WorkCentre Pro PE16
Offices that run Xerox multifunction systems tend to value one thing above clever features: a supply routine nobody has to think about. The WorkCentre Pro PE16 delivers exactly that on the toner side. It takes a single black cartridge, the 113R00667, rated for up to 3,500 pages, and every product listed on this page is a compatible version of that one cartridge — so there is only ever a single part number to reorder.
That single-cartridge design suits a shared office machine. Work arrives from several desks over the course of a day, and when the output finally starts to fade there is no detective work about which color ran out — black is the only toner this machine uses. Keep one spare in the supply cabinet and a cartridge change never turns into an emergency purchase.
Toner Cartridges for WorkCentre Pro PE16
| Cartridge | Color | Page Yield |
|---|---|---|
| 113R00667 — single cartridge | Black | Up to 3,500 pages |
| 113R00667 — 4 pack | Black | 3,500 pages per cartridge |
Which cartridge should you buy?
Choosing here is purely a question of how many cartridges you want on hand. The single 113R00667 suits a lightly used machine or a first restock after the original cartridge runs out. The 4 pack puts the same cartridge on the shelf in quantity, which fits an office that prints steadily and would rather place one order than four. There is no high-yield variant to weigh up and no second supply to balance against it, which keeps the running-cost decision refreshingly binary: one at a time, or a small stock in reserve. If the PE16 is the office's only machine, the pack also removes the risk of a dead cartridge stopping work while a replacement is in transit. Either way the cartridge itself is identical, and every compatible cartridge on this page is covered by a 1-year warranty with 1-year returns.
Chip, toner and everyday use
A new cartridge is recognized as soon as it seats correctly, so push it in firmly until it sits home. Before installing, hold the cartridge level and rock it gently from side to side a few times; this loosens the toner inside and helps the first pages print evenly. Page ratings assume light coverage of around 5 percent per page, so forms and dense documents will use toner faster than letters do. Store spares in their packaging, flat and away from direct sunlight, and they will be ready whenever the machine asks. When prints turn light near the end of a cartridge, the same gentle rocking can coax out a little more life before you swap.
Frequently Asked Questions
What toner cartridge does the WorkCentre Pro PE16 use?
Just one: the black 113R00667, rated for up to 3,500 pages. Both listings on this page — the single and the 4 pack — are compatible versions of that same cartridge.
Does the PE16 need color cartridges or a separate drum?
No. The PE16 works with the single black cartridge listed here, and this page carries no color toner or separate drum for it — when output fades, the black cartridge is the item to replace.
Single cartridge or the 4 pack — which makes sense?
Pick the single if the machine sees light use or you are restocking for the first time. Choose the 4 pack if the PE16 works hard every day; each cartridge in the pack is the same 113R00667, so you are simply buying the spares in advance.
How do I squeeze the last pages out of a fading cartridge?
Take the cartridge out and rock it gently side to side to redistribute the toner, then reinstall it. That often restores even printing for a while, but treat it as borrowed time and have the replacement ready.
