KM-4035

Kyocera KM-4035 printer

The KM-4035 pairs a 40-ppm-class engine with the enhanced feature set the 35 suffix denoted in Kyocera Mita's KM lineup, a modest step up from the base 4030. Like every KM in this family it runs on one black supply, the 370AB011 toner cartridge, which keeps consumable logistics simple even across a fleet of different KM models. This page stocks that cartridge in box counts from a single unit to ten.

The 4035 was positioned as a bridge between the mid-range KM machines and the heavy-duty tier: fast enough for a working department, familiar enough that staff moving between KM models already know the controls. Its single-cartridge supply story is part of that appeal. An office standardizing on this generation of KM copiers orders one toner code for several machine classes, and the KM-4035 slots into that system without adding a second line to the supply order.

Toner Cartridges for KM-4035

Cartridge	Color	Page Yield
370AB011 Toner Cartridge Black	Black	See product page
370AB011 Toner Cartridge 2 Black	Black	See product page
370AB011 Toner Cartridge 3 Black	Black	See product page
370AB011 Toner Cartridge 5 Black	Black	See product page
370AB011 Toner Cartridge 10 Black	Black	See product page

Which cartridge should you buy?

There is only one cartridge decision on this page — how many boxes of 370AB011 to hold. A lone KM-4035 in a small office does fine with a single cartridge plus one spare, the 2 Pack. Facilities running several KM machines from this family should buy deeper: the 5 Pack and 10 Pack exist because the identical cartridge feeds the KM-2530 through the KM-5035, so a central stock serves every department at once and brings the per-cartridge cost down. Note that the rated page yield for this cartridge is published on the individual product pages rather than in the table above; check the listing for the current figure before calculating cost per page for a bid or budget.

Chip, toner and everyday use

Kyocera's paperwork for this family sometimes calls the supply the 370AB000 toner kit; the cartridge code stocked here is 370AB011, and it is the correct order code for the KM-4035. When fitting a fresh cartridge, seat it fully so the machine registers the new supply, and keep the removed cartridge in its packaging until disposal to contain residual toner dust. Store unopened cartridges flat, out of direct sunlight, and use older stock first. If a page band or light patch appears, finish the current job if you can and swap at a natural break — these KM engines are happiest when supply changes are unhurried.

Frequently Asked Questions

Which toner does the KM-4035 use?

The Kyocera 370AB011 black toner cartridge — the dedicated supply for this KM-series copier, sold here in singles and multi-packs up to ten.

Does the KM-4035 use the same toner as the KM-5035?

Yes. The KM-4035 and the faster 50-cpm /kyocera-mita/km-series/km-5035/ both run on the identical 370AB011 cartridge, so one stock covers both machine classes.

Why is there no page yield in the table?

The yield for this cartridge is stated on its product listing, and we point you there rather than print a figure in two places where it could drift apart. Follow any row in the table to the listing for the current rating.