Xpress C416
The Xpress C416 carries a variant number rather than a familiar shelf name, which leads owners to an obvious question: which toner does it actually take? The answer comes from the engine, not the badge. This single-function color printer is cross-referenced into the CLT-406S family — CLT-K406S black alongside CLT-C406S cyan, CLT-M406S magenta and CLT-Y406S yellow — and the compatible cartridges on this page fit it exactly.
Variant numbering is common in this industry: the same engine is sold under different badges for different channels and regions, and the cartridge never changes with the badge. That is good news for C416 owners, because the 406S family is one of the most widely stocked compatible lines in this catalog. Instead of hunting an obscure model-specific supply, you order from a mainstream family with singles for each color and a complete set, all of it shared with the C416's better-known relatives.
Toner Cartridges for Xpress C416
| Cartridge | Color | Page Yield |
|---|---|---|
| CLT-406S 4 Color Set (CLT-K406S / CLT-C406S / CLT-M406S / CLT-Y406S) | Black, Cyan, Magenta, Yellow | See product page |
| CLT-K406S | Black | See product page |
| CLT-C406S | Cyan | See product page |
| CLT-M406S | Magenta | See product page |
| CLT-Y406S | Yellow | See product page |
| Xpress C416 4 Color Set | Black, Cyan, Magenta, Yellow | See product page |
| Xpress C416 4 Color Premium Quality Set | Black, Cyan, Magenta, Yellow | See product page |
Which cartridge should you buy?
Shop by the code, and the variant number stops mattering. When the printer flags a channel, replace that single cartridge — the CLT-K406S if black is low, or whichever color is named. Independent monitoring means a worn black never forces you to discard three healthy colors. Choose the CLT-406S 4 Color Set when you are stocking the machine for the first time, when several channels are low together, or when you simply want the reassurance of a matched reserve set. The set labeled with the C416's own name carries the identical four cartridges, which makes reordering by model name just as safe as ordering by code.
Chip, toner and everyday use
The C416 reads a chip on each cartridge and reports all four levels separately, so the supply you need is never a guess. Remember that yield ratings are calculated at about 5% coverage; charts, slides and photo pages draw color toner at several times that rate, and a color can legitimately empty sooner than its rating suggests. A cartridge that prints pale ahead of its warning usually just needs its toner leveled: remove it, rock it gently side to side, and reseat it. Keep unopened spares flat, sealed and out of sunlight, and they will install and register without complaint months later.
Frequently Asked Questions
My printer says C416 but the cartridges say CLT-406S. Are they right?
Yes. C416 is the model badge; CLT-406S is the cartridge family its engine was built around. The K406S, C406S, M406S and Y406S cartridges are the verified supply for this machine.
Do I have to change all four cartridges together?
No. The channels are independent and each is tracked on its own. Text printing empties the black first; graphics work drains the colors together. Replace only what the printer reports as low.
Why is one color printing pale while the others look fine?
That channel's toner has settled or is running low. Rocking the cartridge gently from side to side redistributes the fill and typically restores even color; if it fades again quickly, that single cartridge is due for replacement.
Is the C416-named set different from the family set?
It is not. The set labeled for this model and the CLT-406S set contain the same four cartridges. The two listings exist so you can order by model name or by cartridge code, whichever you have in front of you.
