Color LaserJet 8500GN PLUS
The GN PLUS badge marks the Color LaserJet 8500GN PLUS as the graphics-oriented bundle of the 8500 line — the configuration aimed at departments producing presentation and marketing color. Its consumable is the same proven four-cartridge set as the rest of the family: C4149A for black, C4150A for cyan, C4151A for magenta and C4152A for yellow.
Graphics work changes the toner math. A department printing charts, covers and photo-heavy decks burns through the three color cartridges far faster than a text-only office, and black may not be the first slot to empty. Keeping the color cartridges in stock is the whole game on this model — a presentation run does not pause politely because the magenta ran out on page forty.
Toner Cartridges for Color LaserJet 8500GN PLUS
| Cartridge | Color | Page Yield |
|---|---|---|
| C4152A | Yellow | See product page |
| C4151A | Magenta | See product page |
| C4150A | Cyan | See product page |
| C4149A | Black | See product page |
The three sets above each hold one cartridge of every color; they differ in grade and listing, not in the codes inside.
Which cartridge should you buy?
Buy singles for the color that actually empties — on a graphics workload that is usually one of the three colors, and there is no reason to retire a healthy black cartridge early. Reach for a set when a big run is coming and two or more slots already read low: starting a campaign with a fresh bay avoids a mid-job swap and the recalibration that follows it. The premium quality set suits output that leaves the building; the standard set is the economical workhorse for internal drafts and proofs. Every option here is a compatible cartridge with a 1-year warranty and 1-year returns behind it.
Chip, toner and everyday use
After any cartridge swap on this model, let the printer finish its calibration before judging color — the first pages after a change are not the ones to proof from. When a new cartridge is not recognized, open the front door, pull the unit out by its handle and slide it back in until it clicks; that full seat is what the printer reads. For color consistency, avoid mixing a nearly empty color cartridge with three fresh ones on important work, since the weak slot limits the whole palette. Keep unopened spares in their bags, out of direct light, until the day they are needed.
Frequently Asked Questions
What toner does the Color LaserJet 8500GN PLUS take?
It needs all four of these cartridges installed: C4149A, C4150A, C4151A and C4152A. Any cartridge or set marketed as a replacement for those exact codes will work in this printer.
How do I install a toner cartridge in the 8500GN PLUS?
Open the front access door, pull the empty cartridge straight out by its handle, and slide the new cartridge in until it clicks. Close the door and let the printer complete its calibration cycle before you print.
What should I do when the 8500GN PLUS shows a toner-low warning?
A low warning means one of the four cartridges is nearly empty, though printing can usually continue for a while. Check the supplies status on the control panel to see which color needs attention, and have that replacement on hand before a long color run.
Why do colors look off right after I changed a cartridge?
Give the printer time to calibrate with the new cartridge seated, then print a test page. If one color still looks wrong, reseat that cartridge; a unit that is not fully home can feed unevenly and skew the mix.