Color LaserJet 8500DN PLUS
Departmental color lasers from the late 1990s were built to be shared, and the Color LaserJet 8500DN PLUS still earns its place in large departments that need color on tap all day. It feeds from four separate toner cartridges: C4149A in black, C4150A in cyan, C4151A in magenta and C4152A in yellow. Each one is replaced on its own schedule, so a department that burns through a single color faster than the rest only renews that slot.
What keeps a machine of this age in service is predictability. The workload on a shared departmental printer is uneven — long black-and-white runs one hour, color handouts the next — and the 8500DN PLUS absorbs that mix without drama. Supplies stay simple because the whole supply question reduces to four codes: keep one spare of each on the shelf and the printer is never waiting on a delivery.
Toner Cartridges for Color LaserJet 8500DN PLUS
| Cartridge | Color | Page Yield |
|---|---|---|
| C4149A | Black | See product page |
| C4150A | Cyan | See product page |
| C4151A | Magenta | See product page |
| C4152A | Yellow | See product page |
When several colors run low together, a four-color set replaces the whole bay in one order: the Color LaserJet 4 Color Set for the 8500 Series, the Premium Quality 4 Color Set for the 8500 Series, or the set listed for this model, the 8500DN PLUS 4 Color Set.
Which cartridge should you buy?
Order singles when your usage is lopsided, which is the normal pattern on a departmental machine: black usually empties first under document volume, while a color slot may sit nearly full for months. A full set makes sense at a planned refresh — when two or more colors are flagged low at the same time, swapping the set together resets every slot in one maintenance visit. The premium quality set is the higher-grade of the two series sets; the standard set covers routine departmental output. Either way, these compatible cartridges carry a 1-year warranty and 1-year returns, so a spare set on the shelf is a low-risk way to keep a shared printer ready.
Chip, toner and everyday use
Each cartridge is read by the printer as it seats, so push a new unit firmly home until it sits flush; a cartridge that is not fully seated is the usual reason a replacement is not recognized. The supplies status on the control panel tells you which color is actually low — trust that readout over guesswork when a warning appears. If pages from a cartridge that still holds toner start to fade, take it out and rock it gently side to side to redistribute the powder, then reseat it. Store spares sealed, flat and away from heat so they are ready the day the shared queue depends on them.
Frequently Asked Questions
Which toner cartridges does the Color LaserJet 8500DN PLUS use?
It uses four cartridges — C4149A black, C4150A cyan, C4151A magenta and C4152A yellow. Match the code printed on the cartridge you remove before ordering, since the four codes look similar on a purchase list.
Do all four cartridges have to be replaced at the same time?
No. Each color runs down independently, and the printer flags them one by one. Replacing a cartridge that still has useful toner left simply throws that toner away, so swap only the slot the supplies status calls out.
The printer warns that toner is low, but pages still look fine. What should I do?
Keep printing. A low warning is an estimate, not a hard stop, and output usually stays acceptable for a while after it appears. Use the warning as your reorder signal so the replacement is on the shelf before quality actually drops.
Why are prints from the 8500DN PLUS coming out faded or streaked?
Start with the supplies readout to find any cartridge that is nearly empty, then run a cleaning page from the printer menus. If one color still streaks, remove that cartridge, rock it gently to level the toner, and reseat it before deciding it is finished.
