null

0

Your cart is empty

MFC-4800

The Brother MFC-4800 is a monochrome laser multifunction built around a two-piece supply system. Printing runs on the TN250BK toner cartridge, the genuine Brother cartridge rated at 2,200 pages, while the image itself is formed on the separate DR250 drum unit, a genuine Brother part rated at 12,000 pages. The shelf for this model is short and exact: one toner cartridge and one drum, both factory Brother listings.

That split decides how the machine asks for supplies over its life. The toner is the routine purchase, swapped whenever a few thousand pages have gone through, while the drum underneath keeps working through cartridge after cartridge and only comes due on its own much longer cycle. Owners who keep one spare toner on hand rarely lose a fax or a print run to an empty machine, and the drum replacement, when it finally arrives, is a planned purchase rather than an emergency.

Toner Cartridges for MFC-4800

CartridgeColorPage Yield
TN250BK genuine Brother toner cartridgeBlack2,200 pages
DR250 genuine Brother drum unitBlack12,000 pages

Which cartridge should you buy?

There is exactly one toner decision on this page: the genuine TN250BK, rated at 2,200 pages. If the machine prints steadily, ordering the next cartridge as the current one runs low keeps the rhythm simple, because a drum rated at 12,000 pages will typically outlast roughly five toner cartridges before it needs attention. Add the DR250 to the order only when print quality, not page count alone, starts pointing at the drum. Both listings here are genuine Brother, which suits owners who want the factory part in a machine of this age rather than an aftermarket fill.

Chip, toner and everyday use

Cartridges of this generation are fitted by hand and read mechanically, so installation is a matter of seating rather than menus. The toner cartridge locks into the drum unit as one assembly before the pair slides into the machine; if output looks uneven right after a swap, lift the assembly out and rock the cartridge gently side to side to level the toner inside. Keep the drum surface covered while it is out of the printer, since that surface is light-sensitive and does the actual imaging work.

Frequently Asked Questions

Which toner cartridge does the MFC-4800 take?

It takes the TN250BK, the genuine Brother black toner cartridge rated at 2,200 pages. There is no separate high-yield version listed for this model, so the one cartridge covers every print job the machine runs.

Is the DR250 drum the same thing as the toner cartridge?

No. The DR250 is the imaging drum the toner cartridge sits in, and it is replaced on its own schedule at around 12,000 pages. A toner swap does not renew the drum, and a drum swap does not add any toner.

Everything on this page is genuine Brother. Is there a compatible option?

Not on this page. The two listings stocked for the MFC-4800 are the factory Brother toner cartridge and the factory Brother drum unit, which is the right fit for owners keeping an older machine on original parts.

Prints are fading even with a recently changed toner. What is wearing out?

That pattern usually points at the drum. The DR250 forms the image before toner fixes it to the page, so as it nears the end of its 12,000-page life, output fades and streaks even when the cartridge still holds toner.

More printers that use the same cartridges

The TN250BK toner and DR250 drum are shared across a family of Brother multifunction, fax and DCP models: DCP-1000, Intellifax 2800, Intellifax 2900, Intellifax 3800, Intellifax 4800, MFC-6600, MFC-6800, MFC-9030, MFC-9070, MFC-9160, MFC-9180, MFC-9680.

SELECT YOUR PRINTER FAMILY TO SHOP MFC-4800 PRODUCTS